D-Link office firewall manual Click New Entry, Name SiteA From Source Internal Subnet/Mask

Page 10

We will begin by configuring the DFL-300 at Site A . Start by going into the web configuration. Once in, go to the VPN menu. You should now be under VPN>Autokey IKE.

Click New Entry

Please fill in the appropriate information for Site A.

Name: Site_A

From Source: Internal

Subnet/Mask:

192.168.10.0/255.255.255.0

Remote Gateway – Fixed

IP: 192.170.0.200

Subnet/Mask:

192.168.20.0/255.255.255.0

Authentication Method:

Preshare

Preshare Key: 123456

Encapsulation: Encryption

(ESP) Click OK

Note: 123456 is an example of a preshare key, please fill in any secret preshare key you desire.

Keep in mind that both sites require the same preshare key.

-10-

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Review Package Contents Connecting the DFL-300Neighborhood Win 98/98SE Or My Network Places Win ME/2K/XP Connecting the DFL-300 …Setting Up the Computer Select propertiesClick Properties Setting Up the Computer …Click OK Configuring the DFL-300 This Enter Network PasswordConfiguring the DFL-300 … Cable Modem User Configuring the DFL-300 … Source Address Service Any Action PermitDestination Address Appendix Name SiteA From Source Internal Subnet/Mask Authentication MethodClick New Entry Remote Gateway Fixed Subnet/MaskName SiteB From Source Internal Subnet/Mask Link Technical Support over Telephone 949 Link Technical Support over the Internet
Top Page Image Contents