D-Link office firewall manual Source Address, Destination Address, Service Any Action Permit

Page 8

Configuring the DFL-300 continued…

Click on New Entry and enter the following:

Source Address:

Inside_Any

Destination Address:

Outside_Any

Service: Any

Action: Permit

Click Ok

There should now be an Outgoing Policy created. This policy will allow all computers in the Internal network to access the Internet.

Note: You do not need to manually restart the DFL-300 Firewall. The changes will take place immediately once you click Ok. Once you are finished with the installation, you should be able to access the Internet.

-8-

Image 8

Contents Review Package Contents Connecting the DFL-300Connecting the DFL-300 … Setting Up the ComputerNeighborhood Win 98/98SE Or My Network Places Win ME/2K/XP Select propertiesClick OK Setting Up the Computer …Click Properties Configuring the DFL-300 This Enter Network PasswordConfiguring the DFL-300 … Cable Modem User Configuring the DFL-300 … Destination Address Service Any Action PermitSource Address Appendix Authentication Method Click New EntryName SiteA From Source Internal Subnet/Mask Remote Gateway Fixed Subnet/MaskName SiteB From Source Internal Subnet/Mask Link Technical Support over Telephone 949 Link Technical Support over the Internet