Gigaset 8800 Handset
The Gigaset 8800 handset is used exclusively on the Gigaset 8825 system. Up to a total of eight handsets may be added.
Handset Setup |
|
Before using your handset, follow these steps: | |
2 Insert batteries | 3 Place cover on back |
as shown. | |
| of handset and push |
| gently upward until it |
– | clicks into place. |
+ |
|
+ –
4Place handset in charger with
display facing out.
IMPORTANT: Charge batteries 12 to 14 hours before using the
handset for the first time. WARNING: Use only NiCd or NiMh “AA” rechargeable batteries. DO NOT USE ALKALINE, LITHIUM, OR
Cordless Handset Registration
The cordless handset that comes with the system is preregistered to the base station. Additional cordless handsets need to be registered to the base station.
1If the handset is not already on, press PWR key in the
lower right corner of handset.
2 When “Please Register” is displayed, press OK.
3 Enter System PIN and press OK (default is 0000).
4 At base station, press MENU.
5 Scroll to “System Settings” by pressing >FWD key and then press SELECT.
6 Enter System PIN and press SELECT (default is 0000).
7 Scroll to “Mobile Registration” by pressing >FWD key and then press
SELECT.
8 When “Select Intercom Number“ is displayed on handset, scroll to number you want to assign, and press OK.
9 When completed, you will hear a confirmation beep.
See User Manual for additional options.
Customer Care:
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.