Siemens 8800 quick start FCC Information

Page 5

FCC Information

This telephone system equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. Some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs.To minimize or prevent such interference, the system base should NOT be placed near or on top of aTV orVCR; and, if interference is experienced, moving the base farther away from theTV or VCR will often reduce or eliminate the interference.

However, there is no guarantee that interference will not occur in a particular installation. If this telephone system does cause harmful interference to radio or television reception, which can be determined by turning the system off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

(1)Increase the separation between the base station and receiver;

(2)Connect the base station to an outlet on a circuit different from that to which the receiver is connected;

(3)Consult the dealer or an experienced radio TV technician for help.

Notice to Hearing Aid Wearers:This phone system is compatible with inductively coupled hearing aids.

Power Outage: In the event of a power outage, your cordless telephone will not operate.The cordless telephone requires electricity for operation.You should have a telephone that does not require electricity available for use during power outages.

Safety Precautions: Before using your telephone equipment, basic safety instructions should always be followed to reduce the risk of fire, electric shock, and injury to persons. Contains Nickel-Metal Hydride Batteries. Battery must be recycled or disposed of properly. Do not dispose in municipal waste. Only use type AA Nickel-Cadmium (NiCd) or type AA Nickel-Metal Hydride (NiMH) rechargeable batteries in the cordless handset. Do not use Alkaline or lithium batteries in the cordless handset or charger. Do not mix old and new batteries. Use the same rechargeable battery type. Do not combine rechargeable battery types. Exercise care in handling batteries in order not to short the batteries with conducting materials such as rings, bracelets, and keys.The batteries or conduction materials may overheat and cause burns or fire. Do not dispose batteries in fire. For additional instructions, see the user’s manual included with your Gigaset 8825 system.

The installation of the base unit should allow at least 8-inches between the base and persons to be in compliance with FCC RF exposure guidelines.

Warranty: The product warranty is contained in the user’s manual. Please refer to the manual for complete product warranty details.

Information subject to change as Siemens reserves the right, without notice, to make changes in equipment design or components. Siemens is a registered trademark and Gigaset is a trademark of Siemens AG.

Made in Germany. © Siemens Information and Communication Mobile, LLC 2001 Copyright. All rights reserved.

A31008-G4035-U102-1-7619

Customer Care: 1-888-777-0211

Or visit our Website: www.icm.siemens.com

Visite nuestro sitio Web para obtener instrucciones en español.

Image 5
Contents Gigaset Quick Start Guide Connecting the ChargerCordless Handset Registration Handset SetupGigaset 8800 Handset Your handset is now registered Ready for use Handset Soft Key OperationBasic Handset Operation FCC Information Please read the following important information Do not Return This Product to the Store