Siemens 242 Cordless Phone
Charging the Battery
CONTAINS NICKEL CADMIUM BATTERY. BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. DO NOT DISPOSE OF IN MUNICIPAL WASTE.
NOTE: To clean the charging contacts, use a pencil eraser or other contact cleaner. Do not use liquids or solvents that can damage your phone.
NOTE:The battery cannot be overcharged.The handset may face to the front or back while it is in the base.
n• zPlacex the handset in the base for 12 hours before first use.
• Place the handset in the base for 4 to 6 hours to recharge.
Maximizing Battery Performance
nA fullyzxcharged battery pack lasts for approximately
• 4 hours when using the handset continuously (talk time)
• 7 days when the handset is not in use (stand-by time)
To maximize battery performance
• Place the handset in the base when not in use.
• Clean the charging contacts on the handset and base once each month.
Battery Cover Release
Preparing the Handset
Installing / Replacing the Battery Pack
n1. zPressx in on the battery cover release.
2. Slide the battery cover off the handset.
3. Plug the plastic connector of Battery Pack into the socket inside the battery compartment of the handset.
4. Insert the Battery Pack into the battery compartment.
5. Tuck the battery wires inside the battery compartment.
6. Slide the battery cover onto the handset; listen for a snap.
NOTE: Replacement battery packs are available for sale by calling the Siemens Customer Service Center at 1 (888)
7 | Owner’s Manual |