| Selecting a Ring Tone | |||
1. | Press |
| . |
|
2. | Press the | key twice to move to “RINGTONE”. | ||
|
|
|
|
|
| "RING |
| TONE |
|
| DIAL | MODE |
| |
|
|
|
|
|
3. | Press |
| to select “RINGTONE”(current tone will sound). | |
nz | x |
| ||
RING | TONE |
| ||
| 2 |
|
|
|
|
|
|
|
|
4.Press the or key to change the ring tone (selected tone will sound).
5.Press to save the ring tone setting.
6.Press to exit.
Selecting Tone or Pulse Dialing
To set the dial mode used by your local phone service (tone or pulse),
1. | Press | . |
|
| |
2. | Press the | key three times to move to “DIAL MODE” | |||
|
|
|
|
| |
| "DIAL | MODE |
|
| |
|
| YOUR AREA CODE |
|
| |
|
|
|
| ||
3. | Press | to select “DIAL MODE”. | |||
nzx |
| or | key to change between tone and pulse. | ||
4. | Press the |
PULSE DIAL
#$TO CHANGE
5.Press to save a dial mode setting.
6.Press to exit.
TONE DIAL
#$TO CHANGE
Storing Your Local Area Code (for use with Caller ID services)
When you program a local area code, calls from that area code will be stored in the call log without the area code.This makes a local number readily available for call back or for moving it to a memory location.To store the local area code,
1. Press | . |
|
|
|
|
| |
Siemens 242 Cordless Phone | 9 | Owner’s Manual | |
nzx |
|
|
|