Siemens 2011 Short cuts New entry, T New Entry, Function list, Insert Function, FunctionDisplay

18.7.99 kap17a.fm5 Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-

Short cuts

New entry

.t

Short Cut

To create a short cut, call up the short cut function in the main menu. If no short cut has previously been created, the short cut list will contain a broken line. You can create a new short cut using the New Entry option in the short cut menu.

(tmeans: scroll with u Z, confirm with x OK )

uW t New Entry

When you select New Entry you can access a one-line Name field and a two-line Contents field. First give the new short cut a name.

Entries for a short cut follow the rules described in the chapter “Input function“ ➔ page 37.

Function list

uW

To make it possible to enter short cut elements (special characters) in the Content field in addition to digits, call up the Insert Function option in the additional menu.

tInsert Function

A list of functions is displayed from which you can choose. Each function which can occur in a command line is presented in this list as plain text. The available func- tions and their meanings are explained in the following ta- ble.

FunctionDisplay

Request PIN Code	C
Request Number	N
Insert Pause	P
Request Acknowl.	Q
Base Prompt	B
INT Key	I
SET Key	S
Redial Key	W
End Call	E
TempSwitchToTone	M

In order to create the "Unit check" short cut, the special characters "C*BS" for Request PIN Code, Display base messages and SET Key are necessary. As these charac- ters cannot be entered in the Contents field with the key- board, they must be obtained from the function list.

78