Siemens Giga 3000 Room monitor, Saving the call number, Setting the noise level

Page 26

Giga 3000 Comfort, IM1-engl, A31008-G3000-B002-3-6Z19 3000co.fm

05.01.00

Room monitor

When the room monitor feature is activated, an internal call to another handset is triggered as soon as the noise level in the monitored room reaches the level set. You can hear the noises in the room when you answer the call. The room monitor remains active even after you replace the handset. Calls are only shown on the monitoring handset’s display. The distance between the handset placed there and the area to be monitored should be between 1 and 2 meters.

Saving the call number

Press the menu key.

<Ö2.Ö Select 5RRP0RQLWRU6HW.

<Ö2.Ö Select 5RRP0RQLW1R

PÖ2.Ö Enter the number of the handset to be called by the monitoring handset and con- firm.

If you entered a 2-digit number by accident: enter a "zero" before the number.

Setting the noise level

Press the menu key.

<Ö2.Ö		Select 5RRP0RQLWRU6HW.
<Ö2.Ö		Select 6HW/HYHO.
	Ö2.Ö	Change the level and save.
		Level 1 = sensitive!

Activating the room monitor

Prerequisite: call number saved.

Press the menu key.

<Ö2.Ö Select 5RRP0RQLWRU6HW.

Ö2.Ö Activate 5RRP0RQLWRULQJ and terminate the function.

9= activated.

Deactivating the room monitor

2))	The handset returns to idle state.

26

Image 26

Contents Gigaset Comfort Protective film Brief overviewIdle display, display keys Important menus Ö2. Safety precautionsDisplay symbols Contents Inserting the batteries Contents of the packagePreparing the handset Charging the batteries Approved batteriesActivating/deactivating keypad protection Fitting the attachment clipActivating/deactivating the handset Handset operating time/charging timeRegistering the handset Direct internal dialling Making callsMaking external calls Answering a callHandsfree talking Handsfree talking when dialling/answering a callWhen the user answers Transferring a call, making an enquiry callAutomatic redial RedialManual redial Additional functionsDialling from the directory DirectoriesStoring a call number Ö2.ÖControlling the cursor Entering namesPress the appropriate key repeatedly or hold it down Deleting a characterRS\QWU\ Handset called ringsLinking call numbers Network access supportSpeed dialling from the network access list Ö2.Ö Change the volume and save Audio settingsHandset/loudspeaker volume Caller listActivating/deactivating warning and signal beeps Ringer volume/melodySetting short beeps advisory beep Select the required functionSecurity functions begin as follows SecurityChanging the telephone PIN Ö2.Ö Ö2.ÖTelephone lock Safety preHot key selection direct station selection Saving/changing/deleting a hot key numberDialling the emergency number Further settingsSetting the display language Auto talkResetting the handset to the default configu- ration Handset factory settingsAll other base settings begin as follows Base settingsAdditional base settings Registering the handsetSaving handset user options Base station user optionsHandset user options handset short cuts QVHUWXQFWLRQ Starting a handset short cutSaving the call number Setting the noise levelRoom monitor Activating the room monitorAppendix Settings at the baseGuarantee/service Range