Doro 820, 830R manual Recall Button Timing, PBX Function

English

Settings

Recall Button Timing

In some PBX installations, the timing of the Recall button may need to be adjusted. For normal domestic use, this setting should not require changing.

If the telephone has been purchased in Australia this setting will be displayed as 3/4.

1.Press w

2.Scroll using <</>> until w flashes in the display. Press 0

3.Press 0 repeatedly until the display shows 4/5. - UK (3/4 - Australia).

4Scroll using <</>> to the desired setting: = 100ms

= 270ms (UK) - 600ms (AU/NZ)

5.Press 0 to confi rm setting and move to the next programming sequence, alternatively.

6.Press w to exit the Menu system.

PBX Function

This telephone has a PBX function that will automatically insert a pause between the fi rst and second digits of the telephone number before dialling.

For example:

When the function is activated (see below), dialling a phone number ie: ”0123456”,

the phone will dial: “0” followed by a pause, and then the remaining part of the

number: “123456”.

If the telephone has been purchased in Australia this setting will be displayed as 4/4.

1.Press w

2.Scroll using <</>> until w flashes in the display. Press 0

3.Press 0 repeatedly until the display shows 5/5. - UK (4/4 - Australia).

4.Scroll using <</>> to the desired setting (YES=on, NO=off). Press 0 to confi rm.

5.Press w to exit the Menu system.

16 www.doro.com