Curtis TC590 owner manual Problem Solving

Page 34

Problem Solving

If after pressing the Talk button, you receive three “beeps” and no dial tone, check the following:

1.BASE UNIT is plugged into a power source.

2.If you had a power failure or had unplugged the BASE UNIT, replace the HANDSET on the BASE UNIT for 2 to 5 seconds to reset the system.

NOTE:

If none of the telephones in the house are working, disconnect one set at a time to verify that none of the phones are causing the problem. If you still have a problem after doing this, and your telephone still does not work, please contact your local phone company.

Can not register the HANDSET, when place HANDSET to BASE UNIT not a long beep heard but the triple beep, check as following:.

1.HANDSET is more than 5.

2.Already has a HANDSET with ID=5, and wish register a new one. In this situation, you should reset the BASE UNIT.

3.reset the BASE UNIT: In standby mode, plug the T/P switch to the “P” position and push and hold the PAGE button on the BASE UNIT 8 -10 seconds, the CHAGRER LED will fast flash 1 second . After reset the BASE UNIT, place the each HANDSET to the BASE UNIT for 2 to 5 second for register(see page 29 for detail).

Image 34

Contents Model TC590 Contents Contents Safety Instructions Important Safety InstructionsSafety Instructions Handset Controls Handset Controls Microphone Base Unit Controls Connecting Your Phone Getting StartedBelt Clip Installation Preparing for Use Cordless Telephone OperationReceiving Calls Redial Feature Placing CallsHandset Volume Control Using the Headset FeatureViewing Caller Information During Incoming Calls Caller ID System OperationCaller ID System Unknown 551 1604MSG Message Waiting Caller ID with Call WaitingOne-Touch Voice Mail Dialing Placing a Call from the Caller List Caller ListViewing the Caller List IncomingStoring Caller ID Records into the Directory Phone Book Name and Telephone Number Directory Phone Book Viewing the Directory Phone BookSpace Telephone Keypad CharactersPlacing Calls from the Directory Phone Book Editing a Stored Number in the Directory Phone BookDeleting a Stored Number in the Directory Phone Book Deleting All Stored Number in the Directory Phone BookOutgoing Calls OutgoingFunction Settings KeypadSetting the Ringer Level Changing the LanguageSetting the Time and Date Turning the First Ring on or OFFSetting the PBX Number Adjusting the ContrastChanging the Flash Time Programming One-Touch Voice Mail Dialing Changing the Pause TimeDeleting Message Waiting Indication Setting the Area CodeMSG Waiting Prepare for use Multi-HANDSET System OperationTransfer Call Security System Resetting Security Code and Channel InformationMulti-Channel Access Security SystemChanging the Battery Pack Recharging the Battery PackRecharging the Battery Pack To Replace the Battery PackProblem Solving Problem Solving Noise Technical InformationTechnical Information RangeFCC Requirements FCC NoticeRinger Equivalence Number FCC Requirements