Doro 5055 manual Hands Free Function

Page 11

English

Operation

Hands Free Function

The hands free button s is located on the back of the handset (5055), and on the front of the handset (5065R). This allows calls to be made without having to hold the handset.

If you wish, you can switch between handset and hands free during a call.

1.Enter the required telephone number.

2.Press O . When the call has been connected press s. The hands free feature will be activated and the conversation can be heard through the speaker.

3.Place the handset vertically on an even surface, e.g. a table.

4.Speak towards the microphone located on the front edge of the handset, ensuring that you are no further than 1 meter (3 feet) away from the handset during the call.

5.If you need to adjust the speaker volume press s repeatedly, the display will cycle through +=low, ++=high and off settings. To reactivate hands free press s again.

6.Press O to terminate the call.

Please note!

Please remember that in hands free speaker mode, it is only possible for one person at a time to talk. The switch over between speaker and microphone is automatic and dependant on the sound level of the incoming call and the microphone respectively.

It is therefore essential that there are no loud noises in the immediate surroundings of the telephone, as this will disrupt the speaker function.

www.doro.com

11

Image 11
Contents Doro 5055/5065R Picture shows 5065R Operation IndexConnection InstallationUnpacking Only for models with an extra handset 5065R+1/5055+1 Batteries Battery Charge IndicatorRange Display Receiving a Call Volume ControlOperation Making a CallHandset Paging Optional Network ServicesTimer Hands Free Function Phone Book Using the Phone BookDialling from the Phone book Caller Identification Messages Page Handset ringer SettingsDe-register a Handset Register a New Handset or Base UnitType of Caller ID CID De-register All other HandsetsLine Adaptation Tone/Pulse Dialling UK onlyPBX Function Recall Button TimingHandset Volume Control 5065R only Multiple Handsets Expanded SystemGeneral Information Multiple Base Units Base Units PlacementTransferring Calls Between Handsets Intercom FunctionAnswering Machine 5065R Switching the Answering Machine On/OffOutgoing Message OGM Command Function Using the Answering MachineDay/Time Stamp Personal Message MemoRemote Code Number of RingsAnnouncement Only ANN Recording Quality / TimeRemote Activation of the Answering Machine Out of MemoryCall Screening Voice ControlRemote Control Other TroubleshootingAnswering Machine Is Not Answering Guarantee Australia and New Zealand Answering Machines REN RN for New ZealandPage English Version