mode=code
Simple change the user.ini line to read:
[3]
name=user%M.ini
mode=code
This will cause the unit to request the ‘loadrun.ini’ and then ‘user000000000000.ini’ for each phone configured. ‘000000000000’ will represent the MAC address of each specific unit.
Changing the Configuration:
∙Prior to making any changes, the Administrator’s Guide and the Web Manual should be consulted.
∙Changes can be made via the web interface or the .ini file can be modified and re- downloaded to the IP5000, noting the issues above regarding environments with multiple units.
∙Examples of the more significant portions of the web interface. This is not a comprehensive web interface tutorial but intended to ensure that all settings required for compatibility with xIC are selected. If a particular section is not shown here, then the defaults were used:
Time
∙Enable NTP
∙Date Format
∙Time Format
∙Time Zone
∙Enable Daylight Saving Time
∙DST Start Month
∙DST Start Day
∙DST Start Hour
∙DST Start Min
∙DST End Month
∙DST End Day
∙DST End Hour
∙DST End Min
∙NTP Refresh Interval (60~3153600)
∙NTP Server1
∙NTP Server2
On Off
Sun DD Jan,YY
24 hours
hours
On Off (DST)
4
2
2
0
10
29
2
0
7200
172.
16 .
1 .
2
192.
43 .
244 .
18