Cobra Electronics CP-2525 operating instructions Quick Set-Up Guide, Wall Mounting Instructions

Page 5

Quick Set-Up Guide

The following basic steps enable quick and easy installation of your new Cobra Intenna® Cordless Phone for use on a desk or countertop. You are encouraged to review this complete instruction manual to become familiar with all of the operating instructions and features of your new phone.

NOTE: Before using, connect your new system to AC power (see instructions below) to charge it overnight (at least 12 hours) for optimum conditioning of the rechargeable battery inside the cordless handset.

1.Insert round connector of power adapter into POWER jack (at side of cordless phoneÕs base; see diagram below). Plug power adapter into a standard 120 VAC household electrical outlet. Then place handset in base so CHARGE indicator lights (see p. 18).

2.After charging, remove the twist-tie from the phone cord and plug the modular telephone connector into the

phone jack on your wall (see above).

3.Make sure that the RINGER switch is ON

(located on handset; see p. 17 for details).

4. Set the PULSE/TONE switch (at the side of the base) for proper operation (see p. 17 for details).

Note: Make sure you have charged handset in base 12 hours before using.

5. Snap the desk bracket into the base as shown in the illustration

7

Wall Mounting Instructions

The following steps enable installation on a new or existing telephone wall- mounting plate or directly onto a wall. (Your Cobra Intenna is designed to be used with any AT&T, GTE, local phone company or other wall-mounting plates that can be purchased from most local electronics stores.)

¥Use the separate wall mounting bracket.

¥Place the telephone line cord so the last inch (near the modular connector)

is in the center opening (as shown).

¥ Wrap the cord counter clockwise around the center until the cord is totally contained in the bracket.

¥ Place the bracketÕs top two tabs into the top two openings in the base back panel.

¥ Carefully snap the bottom two tabs into the bottom two openings in the base back panel.

¥ Plug the modular connector into the telephone wall jack.

¥Align the mounting studs on the wall

plate to the holes in the cord wrap bracket. Push the base onto the studs and slide it down into a locked position on the wall plate.

¥Attach the power adapter to the POWER connection (on the base of the phone) and plug into a household AC power outlet.

¥To install directly on any wall, youÕll need to provide two screws and wall anchors; follow these steps:

ÑDrill two holes 31Ú4Ó apart and insert the wall anchors.

ÑDrive the screws into the anchors until the head of each screw is protruding about 1Ú8Ó from the wall.

ÑFollow the procedure outlined above, except leave enough telphone cord to reach the phone jack before wrapping the cord.

ÑAlign the screws to the holes in the cord warp bracket. Push the base onto the studs and slide it down into a locked position on the wall plate.

ÑPlug modular phone connector into telephone wall jack; attach the power adapter to the POWER connection (on the base of the phone) and plug into to a household AC power outlet.

8

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Cordless Telephone With Caller ID Cordless Telephone Model CP-2525 Table of Contents Important Safety Instructions Introduction Installation InformationWall Mounting Instructions Quick Set-Up GuideCordless Phone Operational Features Using Your PhoneMaking a Call from the Caller ID LOG Caller ID CONT’D Caller ID LOGSpecial Calling Situations Deleting AN Entry in the Caller ID LOGElectronic Directory CONT‘D Electronic DirectoryFlash FindHearing AID Compatibility SystemRechargeable Handset Battery Information Handset Battery Disposal Replacing the Handset BatteryCleaning the Charging Contacts About Cordless Phone PerformanceRegistered with the FCC Cordless Telephone Troubleshooting GuideIf YOU Think YOU Need Service Call Cobra Electronics Corporation Limited One-Year WarrantyCobra Cordless Phone Accessories

CP-2525 specifications

Cobra Electronics CP-2525 is a high-performance CB radio designed for professional truckers and off-road enthusiasts who demand reliability and advanced features. This unit exemplifies Cobra's commitment to quality and user-friendly technology, making it a staple for communication on the road.

One of the main features of the CP-2525 is its powerful 40-channel operation, ensuring seamless communication across a wide range of frequencies. This versatility allows users to connect with other CB radios, ensuring that they can stay informed and maintain contact with fellow drivers, especially during long hauls on remote highways.

The CP-2525 incorporates an impressive 4 watts of output power, which significantly enhances the transmission range. Users can expect clear voice quality over longer distances, facilitating effective communication even in challenging conditions. The radio is also equipped with a built-in SWR (Standing Wave Ratio) meter, which helps users calibrate their antennas for optimal performance, ensuring maximum range and clarity.

Another notable characteristic is the radio's compact design, making it easy to install in vehicles with limited space. The CP-2525 features a user-friendly interface, with a large LCD display that offers clear visibility, day or night. The controls are intuitive, allowing for quick adjustments to volume, squelch, and channel selection.

Cobra has integrated innovative noise-canceling technology into the CP-2525, filtering out background noise and providing clearer audio quality. This feature is especially beneficial for truckers who face noisy environments while driving. Additionally, the radio comes with a built-in automatic noise limiter that helps reduce interference from external signals.

The CP-2525 also supports various connectivity options, including the ability to connect an external microphone for enhanced audio input. This flexibility is essential for ensuring that users can tailor their setups to meet individual preferences.

In terms of safety features, Cobra has included weather band functionality, providing access to local weather updates. This can be a crucial advantage for drivers, allowing them to stay informed about changing weather conditions that may impact their journeys.

Overall, the Cobra Electronics CP-2525 is engineered for durability and performance, making it an ideal choice for those who rely on CB radios for communication during their travels. With its combination of advanced features, user-friendly design, and robust technology, it remains a top option for both professional and recreational users.
Top Page Image Contents