Cobra Electronics CP-9125 operating instructions Installation, Quick Set-Up Guide

Page 5

CP9125manual(6.12) 10/20/98 11:38 AM Page 10

Installation

Installation

Quick Set-Up

Guide

Note

The battery must be charged at least 12 hours before use.

Replacement batteries are available direct from Cobra. See Accessories section on page 44.

Quick Set-Up Guide

1Install Ni-Cad battery in the handset.

To remove the battery door, press and slide downward.

Observe connection orientation, connect the battery and replace the door. The Low Batt indi- cator will blink until the handset is placed in the base and power is applied to the base.

3Connect round connector into power jack on base. In Use indicator on base will flash rapidly.

4

5

2Connect power adapter in outlet.

Place handset on base so Charge indicator lights. In Use indicator will stop flashing.

Raise antenna to vertical position.

continued

 

4

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 5
Contents What’s Included with Your CP-9125 FCC Information Included AccessoriesIf You Think You Need Service Customer Support Controls and Indicators Our Thanks to YouOperating Your CP-9125 How to Use Your Cobra CP-9125 900 MHz Cordless TelephoneImportant Safety Instructions Quick Set-Up Guide InstallationQuick Set-Up Guide Quick Set Up GuideWall Mounting Instructions Wall Mounting InstructionsAnswering Calls From The Handset OperationAnswering Calls FromThe Handset Answering Calls From The Base Answering Calls From The BasePlacing Calls From Placing Calls From HandsetBase Placing Calls From The HandsetFlash ChannelSelection Secur-LocHearing Aid Compatibility ControlMute Last Number Delayed Redial Last Number Delayed RedialLast Number Instant Redial Last Number Instant RedialMemory Number Storage Memory NumberStorage To Find Memory Number DialingMemory Number Dialing To Find The HandsetIntercom Mode From The Base Intercom Mode From HandsetIntercom Mode From The Handset Intercom Mode The From BaseHold Button On The Base Intercom Mode From The BaseHold Button On The Handset Hold Button On The BaseHandset Battery Recharging Ringer SwitchRinger Switch Handset Battery RechargingPrivate Call Battery Saver Voice ScramblingPrivate Call Voice Scrambling Battery Saver Handset Battery Disposal Handset Battery DisposalReplacing Handset Batteries Replacing Handset BatteriesSprOperationadLeft Spread RightOperationPage CleaningHeadset Operation ChargingContactsPhone is dead Are power adapter and phone cord connected? Troubleshooting Frequently Asked QuestionsOther cordless phones Fluorescent fixtures Frequently Asked Questions Limited One Year Warranty Accessories Accessory Order Form