Installing
your Decor
100
into the telephone wall | Using your |
3 Plug your Decor 100 |
|
socket | Decor 100 |
| |
| To make a call |
1Situating your Decor 100
Situate your Decor 100 close enough to a phone socket so that the cables will reach.
Do not stand it on carpets or other similar surfaces that generate fibres.
Do not cover or enclose the machine; allow a free flow of air to its surfaces.
Your Decor 100 can be
Warning
Your Decor 100 is only designed to be operated in a normal office or domestic environment.
It should not be used in bathrooms or near water.
2 Check your telephone
wall socket
If you do not have a modern style socket, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.
4Set the ringer volume
HI
LO
The ringer volume switch is located on the underside of your Decor 100 and effects the volume at which your phone rings.
There are two settings:
HI
A loud ring; your Decor 100 is preset to this position.
LOW
A quiet ring.
Your Decor 100 is now ready for use.
1Lift the handset and listen for a dialling tone.
2Dial the number you require.
To end the call, replace the handset.
To receive a call
1When the phone rings pick up the handset and speak.
To redial the last
number dialled
1Lift the handset.
Press the REDIAL button.
Redial
The phone will automatically dial the last number dialled.
To store phone numbers in the Quickdial memory
Your Decor 100 has 10
QUICKDIAL button.
Quickdial
2