1Lift the handset.
2Press the STORE button.
Store
3Dial the phone number to be stored.
4Press the STORE button.
Store
5Press the 0
JKL
5
The phone number is now stored.
Repeat these steps for any other numbers you want to store, using a different 0
Each memory location can store a maximum of 16 digits.
Stored numbers can include switchboard and network services that use the ✱ and # buttons as well as the PAUSE function.
To dial a number
stored in the
Quickdial memory
1Lift the handset. Press the QUICKDIAL button.
Quickdial
2Press the 0
JKL
5
The phone number is dialled automatically.
To store a
phone number you
have dialled
When making a phone call, you can store the number you have just dialled.
1Before replacing the handset press the STORE button twice.
Store
2Press the 0
JKL
5
The phone number dialled is now stored.
To change numbers stored in the memory
To change phone numbers stored in the memory, simply repeat the process of storing the original numbers but enter the new number. The number stored in that location is automatically replaced by the new number.
To store a pause in
the memory
With some switchboards, after dialling the access code you may have to wait for a moment while the switchboard picks up an outside line. If so, you can insert a pause into the number to allow for this delay.
A pause can also be stored as part of a number in the memory.
When storing a phone number in the Quickdial memories:
1Enter the first part of the phone number (the access code) which gives you an outside line.
2Now enter a pause by pressing the REDIAL button.
Redial
3