Cooper Lighting V90229-1T Lampholder, Optical Accessory Retainer Ring Cover, Ceiling Line Snoot

Page 2

INSTALLATION INSTRUCTIONS

V90229-2

 

 

COMBOLIGHT

Avoid Fire or Electric Shock



R

LAMPHOLDER

 

 

 

 

Page 2 of 3

*Installation Instructions for qualified electricians only. *Install per National Electrical Code and local regulations. *Read Installation Instructions completely before installation. *Failure to follow Installation Instructions may void warranties.

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

11.Lamp installation:

To install LAMP, remove the COVER RING by pushing straight back on the COVER RING and then turning it counter-clockwiseto release. See Fig. 5.

12.Once removed, insert the properly-specified LAMP into the

BACK RING, ensure that the LAMP is the correct LAMP for the SOCKET or damage to the fixture or lamp may occur. The LAMP will seat into the COIL SPRING when installed properly. While holding the LAMP in place, grab the SOCKET ASSY and plug or screw the LAMP firmly into it.

See Fig. 6.

BACK RING

COVER

RING

COIL SPRING

Figure 5

SOCKET ASSY

BACK RING

PIVOT JOINT (FOR GIMBAL TIGHTENING)

LAMP

(MR16 shown, COIL SPRING behind)

Figure 6

(Cover Ring Removed)

OPTICAL

ACCESSORY

ACCESSORY

RETAINER

RING

COVER

RING

Figure 7

13.Optical Accessory: (skip to Step 21 if not using optical accessories) To install OPTICAL ACCESSORY pieces, remove the ACCESSORY RETAINER RING by unthreading until it is completely removed from the

COVER RING.

14.Install desired OPTICAL ACCESSORY pieces into the COVER RING and re-thread the ACCESSORY RETAINER RING firmly. See Fig. 7.

*The COVER RING can accommodate three (3) accessories without the ACCESSORY RETAINER RING or two (2) pieces with it.

*The ACCESSORY RETAINER RING may be used to lock the accessory. For example, a linear spread lens or cross baffle can be locked in-place into a desired orientation.

*Please note that not all accessories are compatible with each other and with all lamps.

CEILING

LINE

 

SNOOT

Flush Position

Regressed Position

Figure 8

15.Regressed Lamp Ring/Snoot: (skip to Step 19 if not regressing the lamp) The lamp ring may be installed in a regressed position only if a

SNOOT accessory is being used. See Fig. 8. If necessary, please see step 13 for instructions on SNOOT installation. To accomplish the regressed lamp ring position set the COVER RING aside. Remove the lamp ring assy by loosening the two (2) SET SCREWs in the GIMBAL BLOCKs.

16.Once loosened the lamp ring assy can be removed by grasping the GIMBAL RING and turning clockwise until it releases from the GIMBAL BLOCKs.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Trimmed Ceiling Line Snoot Optical Accessory Retainer Ring CoverLampholder Cover RingPIN Back Ring Bayonet Slots Cover AS InstalledGimbal Gimbal Ring Block Snoot Slot SET Screw Cover Ring

V90229-1T specifications

Cooper Lighting's V90229-1T is a versatile and innovative lighting solution designed to meet the demands of modern spaces. Combining functionality, energy efficiency, and aesthetic appeal, this product stands out as an ideal choice for both residential and commercial applications.

One of the main features of the V90229-1T is its adjustable brightness capabilities. This model typically comes equipped with dimming options, allowing users to customize the light levels according to their needs. Whether it’s creating a cozy atmosphere in a living room or providing the necessary illumination for a workspace, this flexibility ensures that optimal lighting conditions can always be achieved.

The V90229-1T utilizes advanced LED technology, which delivers exceptional energy efficiency. LEDs consume significantly less power than traditional incandescent or fluorescent bulbs while providing a comparable, if not superior, level of brightness. This energy-saving feature not only contributes to lower electricity bills but also extends the lifespan of the lighting fixture, reducing the frequency and costs associated with replacements.

In addition to energy efficiency, the V90229-1T is known for its high color rendering index (CRI). A higher CRI means colors appear more vibrant and true to life, making this lighting solution perfect for areas where accurate color perception is crucial, such as in art studios or retail environments.

Another noteworthy characteristic of the V90229-1T is its sleek and contemporary design. The fixture seamlessly integrates into various decors, enhancing the aesthetic appeal of any room. With options for different finishes, it caters to a range of styles from minimalistic to more elaborate designs.

Installation and maintenance are further simplified with the V90229-1T. The fixture typically features a user-friendly mounting system, making it easy for both professionals and DIY enthusiasts to set it up quickly. Moreover, the durability of LED technology means less frequent maintenance and a reduced carbon footprint over the product's life cycle.

In conclusion, the Cooper Lighting V90229-1T is a standout lighting solution that combines adjustable brightness, energy efficiency, high color rendering, and an appealing design. Its versatility makes it suitable for numerous environments, making it an excellent investment for those looking to enhance their space with modern lighting technology.
Top Page Image Contents