Cooper Lighting V90229-1T Gimbal Gimbal Ring Block Snoot Slot SET Screw, Cover Ring, AS Installed

Page 3

INSTALLATION INSTRUCTIONS

V90229-3

 

 

COMBOLIGHT

Avoid Fire or Electric Shock



R

LAMPHOLDER

 

 

 

 

Page 3 of 3

*Installation Instructions for qualified electricians only. *Install per National Electrical Code and local regulations. *Read Installation Instructions completely before installation. *Failure to follow Installation Instructions may void warranties.

THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

GIMBAL BRACKET (Standard Position)

GIMBAL BRACKET (Rotated 180° to "Down" Position)

Figure 9

17.Once removed, flip the two (2) GIMBAL BRACKETs around (180°) and tighten the joint if necessary. See Fig. 9.

If necessary, please see Step 21 for gimbal tightening instructions.

18.Reinsert the lamp ring assembly by turning it counter-clockwiseinto the SLOTs on the GIMBAL BLOCKs. Re-tighten the two (2) SET SCREWs in the GIMBAL BLOCKs. The lamp ring assy should now be oriented in the "up position". See Fig. 10.

GIMBAL

GIMBAL RING

BLOCK

SNOOT

 

SLOT

SET SCREW

Figure 10

19.To replace the COVER RING:

Push the COVER RING onto the BACK RING by lining up the BAYONET SLOTS (see Fig. 11) with the two (2) PINs in the BACK RING.

PIN

BACK RING

BAYONET

SLOTS

COVER

RING

Figure 11

20.Once lined up, push straight back until the COVER RING stops, then while keeping the COVER RING pushed back, turn clockwise until it pushes forward again slightly. See Fig. 12.

 

COVER RING

Figure 12

(AS INSTALLED)

21.Gimbal tightening instructions:

The lamp ring is intended to give positive tension at the PIVOT JOINTS so the lamp ring can be aimed by hand and held in place by tension.

*If a stronger, more secure lock is required then the PIVOT JOINTS (hex screws) may be tightened clockwise with a hex wrench tool. See Fig. 6. *Please note that in some conditions the COVER RING will need to be removed to gain access to the inner PIVOT JOINTS.

Image 3
Contents Trimmed Cover Ring Optical Accessory Retainer Ring CoverLampholder Ceiling Line SnootCover Ring AS InstalledGimbal Gimbal Ring Block Snoot Slot SET Screw PIN Back Ring Bayonet Slots Cover

V90229-1T specifications

Cooper Lighting's V90229-1T is a versatile and innovative lighting solution designed to meet the demands of modern spaces. Combining functionality, energy efficiency, and aesthetic appeal, this product stands out as an ideal choice for both residential and commercial applications.

One of the main features of the V90229-1T is its adjustable brightness capabilities. This model typically comes equipped with dimming options, allowing users to customize the light levels according to their needs. Whether it’s creating a cozy atmosphere in a living room or providing the necessary illumination for a workspace, this flexibility ensures that optimal lighting conditions can always be achieved.

The V90229-1T utilizes advanced LED technology, which delivers exceptional energy efficiency. LEDs consume significantly less power than traditional incandescent or fluorescent bulbs while providing a comparable, if not superior, level of brightness. This energy-saving feature not only contributes to lower electricity bills but also extends the lifespan of the lighting fixture, reducing the frequency and costs associated with replacements.

In addition to energy efficiency, the V90229-1T is known for its high color rendering index (CRI). A higher CRI means colors appear more vibrant and true to life, making this lighting solution perfect for areas where accurate color perception is crucial, such as in art studios or retail environments.

Another noteworthy characteristic of the V90229-1T is its sleek and contemporary design. The fixture seamlessly integrates into various decors, enhancing the aesthetic appeal of any room. With options for different finishes, it caters to a range of styles from minimalistic to more elaborate designs.

Installation and maintenance are further simplified with the V90229-1T. The fixture typically features a user-friendly mounting system, making it easy for both professionals and DIY enthusiasts to set it up quickly. Moreover, the durability of LED technology means less frequent maintenance and a reduced carbon footprint over the product's life cycle.

In conclusion, the Cooper Lighting V90229-1T is a standout lighting solution that combines adjustable brightness, energy efficiency, high color rendering, and an appealing design. Its versatility makes it suitable for numerous environments, making it an excellent investment for those looking to enhance their space with modern lighting technology.