BT 1050 manual Channels Base Unit Tx Handset Tx Freq./MHz

Page 35

Call security

Your Freestyle 1050 has its own digital security code that prevents other cordless phone owners from using your phone line. This ensures that you are charged only for calls using your phone. However, all approved cordless phones use radio signals to communicate between the base unit and cordless handset units. It is therefore possible that your conversations could be overheard by other people, on their cordless phones, or on radios that use the same radio frequencies.

As this problem applies equally to all similar cordless phones currently available in the UK, call privacy cannot be guaranteed. However, the security coding prevents unauthorised use of your line.

In the unlikely event of your Freestyle 1050 picking up conversations from other cordless phones being used nearby, try changing channels using the CHANNEL button on the handset.

Transmission frequencies

This cordless telephone has been designed to operate on radio frequencies which have been assigned to the exclusive use of cordless telephones. As the use of cordless telephones becomes more widespread, the quality of service obtained from this apparatus may lessen.

Transmission frequencies of available channels:

Channels

Base Unit Tx

Handset Tx

 

Freq./MHz

Freq./MHz

 

 

 

1

31.0375

39.9375

 

 

 

2

31.0625

39.9625

 

 

 

3

31.0875

39.9875

 

 

 

4

31.1125

40.0125

 

 

 

5

31.1375

40.0375

 

 

 

6

31.1625

40.0625

 

 

 

7

31.1875

40.0875

 

 

 

8

31.2125

40.1125

 

 

 

Safety advice

Don’t use your Freestyle 1050 in the open air during thunderstorms. Unplug it from the telephone line and the mains socket when there are storms in your area.

Don’t use your Freestyle 1050 outdoors in the rain, or handle it with wet hands.

Don’t install the base unit near a sink, bath or shower. Electrical appliances can cause serious injury if used when you are wet or standing in water.

Don’t install the base unit where the various leads can be tripped over or walked on. This may cause injury, or damage to the leads and your Freestyle 1050.

In the event of a power failure

In the event of a mains power failure you will not be able to make or receive calls from your Freestyle 1050. Alternative arrangements should be made for access to emergency services.

TECHNICAL INFORMATION

31

Image 35
Contents Freestyle User GuidePage Page Channel At a glanceF1050 Page This guide Using your Freestyle Answering machineEmergency calls IntroductionFor your records Unpacking your FreestyleCheck your telephone socket Setting upPlug the mains adaptor cord into Back of the base unit Charge the handset battery for at Least 12 hoursYour Freestyle 1050 is now ready for use To plan the location Base unitMaking and receiving calls Using your Freestyle1050 telephoneTo store a number in the memory Using the memory to store and dial numbersUsing the Secrecy button To ensure the best sound qualityTo dial a stored number of more than 16 digits Did you know?To use the recall button To page the handsetTo insert a pause Message display Using the Freestyle1050 answering machineOutgoing messages To delete your outgoing message To switch the answering machine on/offTo record your outgoing message To check your outgoing messageIncoming messages To adjust the loudspeaker volumeTo switch the message alert on or off Message alertTo pause a message Using the 1471 feature with your answering machineTo play back a message To delete individual messages To skip forward or backward through messagesTo delete all messages Call screening Answer delay1471 off Using the 1471 featureTo switch the 1471 feature on and off To screen a call vial the handsetTo check VIP code and setting Using the VIP featureTo switch the VIP feature on and off To allow VIP callers to signal their callTo record a memo To cancel any procedureWhen the memory is full MemosTo replay all messages Operating your answering machine from the cordless handsetTo start playback of messages To screen a call via the handset To change your outgoing messageTo go back to the pre-set outgoing message To check for messages Remote accessTo delete the message you are listening to Controlling your messageTo move forward to the next message To turn your Freestyle 1050 off To cancel message playback or pauseTo turn your Freestyle 1050 on To change your outgoing message Help Telephone problems Possible cause Solution Callers are faint General problems Answering Machine problems Possible cause SolutionYou may not connect it Technical informationYou may connect it Channels Base Unit Tx Handset Tx Freq./MHz Maintenance Guarantee Wall Mounting Wall Mounting template Index Index Page Offices in Europe, North America, Japan and Asia Pacific