To ensure the best sound quality
Your Freestyle 1050 automatically scans available radio channels between the handset and base for the best quality signal. However, if you hear noise or interference during your call:
Press the CHANNEL button.
Using the memory to store and dial numbers
Your Freestyle 1050 handset can store up to ten separate phone numbers, each up to 16 digits long. You can then dial each number by pressing just two buttons.
To store a number in the memory
Your Freestyle 1050 will select a new channel for you.
If you go out of range
Your Freestyle 1050 has a range of 200 metres under ideal conditions.
However, if you go out of range during a call, you will hear a series of beeps, Move closer to the base to
Using the Secrecy button
You can prevent your caller from hearing you while you talk to someone else close by.
|
| Press the SECRECY button. A beep is |
S | re | heard and the IN USE light flashes. |
c | en |
|
uickdi | |
Q | al |
DIAL
uickdi | |
Q | al |
Press buttons in order shown
Press the QUICKDIAL button. You hear a beep and the IN USE light begins to flash.
Press one of the
Dial the number you want to store.
Press the QUICKDIAL button. You hear a confirmation beep. The number is stored.
Repeat these steps for any other numbers you want to store, using a different
Storing a number in the memory automatically overwrites any
USING YOUR PHONE
Your caller cannot hear you until you press the SECRECY button again.
previous number stored under the same location code.
Stored numbers can include those for switchboard and network services that use the ✱ and # buttons as well as the PAUSE and RECALL functions.
9