Diverse 3000 H_set & Charger 22/3/01 1:54 pm Page 26
Diverse 3000 ~ Edition 7 ~ 28th February ’01 ~ 3723
Using Caller Display and Call Waiting
BT’s Caller Display and Call Waiting
If you subscribe to Caller Display you can see who is calling you (on your handset display). If you are on a call and you also subscribe to a Call Waiting service, the second incoming call number will appear on the handset display and you will hear an intermittent beep through the handset. This is to alert you to another caller waiting to speak to you.
With BT’s Caller Display and Call Waiting service your Diverse base station receives caller information which is transmitted over the BT Network.
If you are using the Classic handset, the screen shows the caller’s number (if it has been sent) when the phone rings.
With the Executive handset if you have stored a name to go with the number in your handset directory, the name will be displayed instead.
To take the Call Waiting
RPress the RECALL button. Your first caller is put on hold whilst you speak to your second caller.
To speak to your first caller again you can either:
RPress the RECALL button again and you will be reconnected to your first caller, your second caller will be put
on hold. You can use the
RRECALL button to toggle between the two callers.
Or
Press the RED PHONE button to end the conversation with the caller you are currently speaking to. The handset will ring again.
Press the GREEN PHONE button and you will be reconnected to the caller who was on hold.
26