BT Setting up, Follow these steps to set up your Synergy 600 ready for use, Plan the location

Page 10

Synergy 600 user guide ~ 6th Edition ~ 20th June ’01 ~ 3718

Setting up

Follow these steps to set up your Synergy 600 ready for use

SETTING UP

Plan the location

Position your Synergy 600 within 2 metres of a power socket and phone socket otherwise extension cables will be required.

Make sure it is at least 1 metre away from other electrical products to avoid interference.

Do not place your Synergy 600 product in the bathroom or other humid areas.

1Connect the power supply to the base

Plug the power supply cable into the power socket on the underside of your base.

Plug the power adaptor into the mains power socket and switch on. The green Power/In Use light comes on.

Note

The base station must be plugged into the mains power socket at all times.

Do not connect the telephone line cord to the phone socket until your handset is fully charged. This will prevent the risk of the phone being answered before the battery pack is charged. Answering the phone before the battery pack is fully charged may prevent it from reaching its optimum capacity.

			Warning
		Under no circumstances should a
		non-rechargeable battery pack be
		used. Only use the approved battery
		pack. Using an unapproved battery
	L	pack will invalidate your guarantee
		and may damage the telephone.

7

Image 10

Contents User Guide Information for the handset settings Quick GuideSynergy 600 user guide ~ 6th Edition ~ 20th June ’01 ~ Handset At a glanceDigitalCl a r i t y Base Display iconsMenu Structure This guide Key features Introduction Safety informationUnpacking your Synergy Connect the power supply to the base Setting upFollow these steps to set up your Synergy 600 ready for use Plan the locationBattery low warning 0845 769Connect the telephone line cord Your Synergy 600 is now ready for useCall timer Using the telephoneMaking and receiving calls To receive a call To adjust the earpiece volumeRedial RedialName and number and Phonebook To switch secrecy on / offSecrecy To store a name and number in the PhonebookPress the Green Phone To enter a pause in a stored numberTo dial a number from Phonebook To edit Phonebook names and numbersTo delete a Phonebook name and number Paging handsetsTo page a handset from the base To switch keypad beeps on Handset settingsOff Volume To switch auto-talk on/off To set the external or internal ringer melodyTo name a handset Base settings To adjust the base ringer volumeTo select a base station To change the base station PIN codeHandset language EnglishCalls list BT Select ServicesCaller Display 0800 800To enter the Calls list To call back a number from the Calls listTo delete all numbers from the Calls list Call WaitingTo delete a number from the Calls list To use Call WaitingOther services At the base To register a handset to another baseAt the handset To de-register a handset from the base Handsets can only be de-registered via another handsetTo make an internal call to another handset Internal callsTransferring calls Green Phone buttonDuring a call with an external caller Three-way conversationHandset Priority No display appears Replacing the handset battery packHelp No dial toneBuzzing noise on my radio, TV, computer or hearing aid Cannot adjust an option in the base stationNo ring on the handset Charger does not appear to be workingGuarantee General informationTechnical information Switchboard external line access codeSwitchboard compatibility RecallTo automatically insert a pause after an access code To set the dialling modeYou can also adjust the length of the pause to be inserted Accessories and spares for the Synergy Dect Telephone range Index REN TTE Offices worldwide