BT 600 manual Battery low warning, 0845 769

Page 11

Synergy 600 user guide ~ 6th Edition ~ 20th June ’01 ~ 3718

2Charge the handset battery pack for at least 16 hours

A battery pack is pre-installed within the handset.

Place the handset on the base station. The red charging light will come on. The battery symbol is shown on the display during charging. Leave to charge for at least 16 hours.

Once the handset is fully charged, the display shows a full battery symbol.

BATTERY LEVELS

WEAK HALF-FULL FULL

Battery low warning

If the handset battery symbol is empty and flashing, and you hear a warning beep every 10 seconds, you will need to recharge your handset before you can use it.

Helpline

If you are experiencing difficulty, please call the Synergy Helpline on

0845 769 7146.

Battery performance

The charge capacity of rechargeable battery packs will reduce with time as they wear out, so reducing talk/standby time of the handset. Eventually they will need to be replaced. New battery packs can be obtained from any BT Shop or from the Helpline on 0845 769 7146.

After charging your handset for the first time, subsequent charging time for the battery pack is approximately 6-8 hours a day. Battery pack and case may become warm during charging, this is normal.

Under ideal conditions, the handset battery pack should give about 12 hours talktime or 150 hours standby on a single charge. (This does not mean you can unplug the base station or leave it for this length of time without charge.)

Please note, however, that new NiCad battery packs do not reach full capacity until they have been in normal use for several days.

SETTING UP

8

Image 11

Contents User Guide Quick Guide Information for the handset settingsSynergy 600 user guide ~ 6th Edition ~ 20th June ’01 ~ DigitalCl a r i t y At a glanceHandset Display icons BaseMenu Structure This guide Key features Unpacking your Synergy Safety informationIntroduction Plan the location Setting upFollow these steps to set up your Synergy 600 ready for use Connect the power supply to the base0845 769 Battery low warningYour Synergy 600 is now ready for use Connect the telephone line cordMaking and receiving calls Using the telephoneCall timer Redial To adjust the earpiece volumeRedial To receive a callTo store a name and number in the Phonebook To switch secrecy on / offSecrecy Name and number and PhonebookTo edit Phonebook names and numbers To enter a pause in a stored numberTo dial a number from Phonebook Press the Green PhoneTo page a handset from the base Paging handsetsTo delete a Phonebook name and number Off Volume Handset settingsTo switch keypad beeps on To set the external or internal ringer melody To switch auto-talk on/offTo name a handset To adjust the base ringer volume Base settingsTo change the base station PIN code To select a base stationEnglish Handset language0800 800 BT Select ServicesCaller Display Calls listTo call back a number from the Calls list To enter the Calls listTo use Call Waiting Call WaitingTo delete a number from the Calls list To delete all numbers from the Calls listOther services At the handset To register a handset to another baseAt the base Handsets can only be de-registered via another handset To de-register a handset from the baseGreen Phone button Internal callsTransferring calls To make an internal call to another handsetHandset Priority Three-way conversationDuring a call with an external caller No dial tone Replacing the handset battery packHelp No display appearsCharger does not appear to be working Cannot adjust an option in the base stationNo ring on the handset Buzzing noise on my radio, TV, computer or hearing aidGeneral information GuaranteeRecall Switchboard external line access codeSwitchboard compatibility Technical informationYou can also adjust the length of the pause to be inserted To set the dialling modeTo automatically insert a pause after an access code Accessories and spares for the Synergy Dect Telephone range Index REN TTE Offices worldwide