Elements Additional Handset – New Style – Edition 2 – 31.08.06 – 7780
5Getting started
6.Enter the 4 digit PIN code of the base station you are registering to (BT Elements base default 0000) and press Menu .
When the base is located, your handset will display the base ID number, press Menu to confirm registration to this base or cancel by pressing 
.
The handset is automatically allocated the next available handset number which is displayed when in standby mode.
If registration is unsuccessful, the handset will return to standby mode. Try moving closer to the base you want to register to and following the registration procedure again.
Wall mounting (optional)
If you wish you can wall mount the handset and charger.
IMPORTANT
Before you wall mount, please check that:
•you are not drilling into any hidden wiring or plumbing
•the mains power adaptor will reach the plug socket
BT are not responsible for any damage / injury caused while attempting to wall mount your phone.
1.Drill two holes in the wall for the 2 screws provided using the wall mounting bracket as a template.
3
8
50
2.Insert the wall plugs provided into the holes and then insert the 2 screws, one into each hole. Leave a gap between the
head of the screw and the wall (approx 3mm).
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com