BT manual To de-register a BT Freelance XH 2100 handset from the base

BT Freelance XH 2100 user guide ~ 2nd Edition ~ 18th March ’04 ~ 6012

other bases that the handset is already registered to).

Enter the base number

(BS 1-4) that you want to register the handset to.

Enter your 4-digit PIN (original factory setting OOOO) and press the  button.

The display will show SEARCH 1, 2, 3, 4 and the symbol will flash as the handset tries to locate the base. When the handset locates the base, the handset will be automatically selected and shown on the display.

Note

If the handset does not locate the base, the handset will return to the previous menu. Try to register again by using a different available base number. Ensure that you are in close vicinity of the base).

Note

Your 4 digit PIN number is 0000 unless you have previously allocated a new PIN number as explained on page 24.

To de-register a BT Freelance XH 2100 handset from the base

Note

Handsets can only be de-registered via another handset.

	Menu		Press the  button to enter
			the menu.
C			Use the	DOWN	button to
	a
	l
	ls		scroll to SETUP and press the
	Menu
			 button.
C			Use the	DOWN	button to
	a
	l
	ls		scroll to DEL HS and press
	Menu
			the  button.
			The display will show PIN?
			Enter your 4-digit PIN.
	Menu		Press the  button.
		Vol	Use the UP or DOWN button
		
			to select the handset you want
	lls	
C
	a
			to de-register (HANDSET 1-5).
	Menu		Press the  button. Display
			shows CONFIRM?.
	Menu		Press . You will hear a

confirmation beep.

Once de-registered, the handset will display NOT REG.

ADDITIONAL

31