BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
Using the phone | 19 |
|
|
Switch handset on/off
1.Press and hold to switch the handset off.
2.Press again or place it in the base to switch the handset back on.
Make a call
1.Press . Calling is displayed.
2.Dial the number.
Preparatory dialling
1.Enter the number first. If you make a mistake, press the
option button underneath Clear in the display to delete any digit.
2.Press to dial.
End a call
Press . The call timer shows the duration of your call. Or close the handset.
You can dial up to 25 digits using preparatory dialling.
If you are connected to a switchboard and need to enter a pause after the switchboard access code, press and hold the UP navigation button. The display shows P’ to indicate a pause has been set.
Call timer
The Call Timer shows the duration of your call and is displayed 15 seconds after dialling.
If you experience any problems, please call the Helpline on 0870 605 8047