BT Zenith Flip – Issue 1 – Edition 04 – 08.09.05 – 6861
Base settings | 65 |
|
|
Handset priority
1.Select Menu and scroll UP/DOWN/LEFT/RIGHT to Base Settings. Select OK. Scroll DOWN to Handset Priority.
2.Select OK. Use UP or DOWN to select from:
All Handsets – all handsets ring together. Select OK Select Handset – to choose one handset to ring first. Select OK then scroll UP or DOWN to the handset you want, and select OK. Now scroll UP or DOWN to select how many rings the handset will give before the other handsets start ringing as well. Select OK.
Display shows Handset Priority Saved.
3.Select Back to return to the previous screen.
Dial mode
1.Select Menu and scroll UP/DOWN/LEFT/RIGHT to Base Settings. Select OK. Scroll DOWN to Dial Mode.
2.Select OK. The current setting is highlighted.
3.Press UP or DOWN to select Tone Mode or Pulse Mode. Select OK to confirm.
4.Select Back to return to the previous screen.
If you have more than one handset registered to your base, they all ring at the same time.
With handset priority, you can set one handset to ring before the others.
Switch to Pulse during a call If you have dialled out from a switchboard using Pulse dialling, you can switch to Tone dialling during the call by pressing and
holding the 
button.
See also, Connecting to a switchboard, page 80.
Your BT Zenith Flip is set to TONE dialling. You should never need to change this unless connected to a switchboard that requires PULSE dialling. Check with your switchboard supplier.
If you experience any problems, please call the Helpline on 0870 605 8047