BT BT STUDIO 1100 manual Using additional handsets, If you purchase a new handset to use with your

Using additional handsets 37

If you purchase a new handset to use with your

BT Studio 1100 it will have to be registered to the base. You will need to do this before you can use it.

If you have purchased a BT Studio 1100 multiple pack each additional handset will come pre-registered to the base.

With additional handsets, you can make internal calls, page handsets and transfer external calls between your handsets.

Registering a new GAP compatible handset to your BT Studio 1100 base

At the new handset:

1.Follow the new handset’s user guide to set the handset in registration mode.

At the BT Studio 1100 base:

1.Press and hold the base Page button for at least 10 seconds, until you hear the validation tone (two beeps), then release the button.

IMPORTANT

You must choose a handset that is GAP compatible to use with your BT Studio 1100.

If the handset does not locate the base, the handset will return to the previous menu. Try to register again by using a different available base number. Ensure that you are in close vicinity of the base.