PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 16
Telephone Operations
Placing a Call
1.Press the TALK button (TALK button will illuminate GREEN) and dial the number you wish to call.
2.To end the call press the TALK button or place the handset in the base.
Or
1.Press the keys of the numbers needed to dial. The LCD will display PREDIAL and the keys pressed.
2.Press the TALK button. Handset will go
Answering a Call
If the handset is out of the cradle, press the TALK button.
If the handset is in the cradle with Auto- Connect Mode ON, lift the handset. The handset will be in receiver mode.
If the handset is in the cradle with AutoConnect mode OFF, lift the handset. The handset will be in standby mode. Press TALK button to receive the call.
Refer to BOOST Clarity Power and Volume Control for information on adjusting volume controls on Page 14.
Last Number Redial:
The last number dialed (up to 32 digits) is stored in the redial memory until another number is dialed.
To use this feature:
1.Press the TALK button.
2.When you hear the dial tone, press the RD/P button.
3.The phone will automatically dial for you.
Pause Feature:
Programming in a pause will cause the phone to wait four (4) seconds before dialing additional numbers. This feature may be used when it is necessary to dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. Press the RD/P button at the required point during the memory storage process to program a pause.
Temporary Tone
If you have rotary (pulse) dial service, you can change from pulse to touch tone (tone) during a call.
1.Make phone call and wait until it is connected.
16