Troubleshooting

PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 27

•Make sure the handset battery is fully charged.

•Try relocating the base unit to another location.

•Make sure the AC Adapter is not plugged into the wall outlet with other appliances.

Phone Will Not Hold Charge:

•Make sure the charging contacts on the handset and base are free of dust and dirt. Clean the contacts with a soft cloth.

•Make sure CHARGE LED on the base is lit when handset is in the cradle.

•If necessary, replace the handset battery. (See Handset Battery Charging)

Difficulty in Placing or Receiving Calls:

•Move closer to the base and try again.

•If moving closer does not work, you may have lost the security code.

•Reset code by placing the handset back on the base for 5-10 seconds. (See Security Code Section)

•Make sure you have selected the correct dialing mode, tone or pulse.

•Make sure the AC Adapter is not plugged into a wall outlet with other appliances. Disconnect for 5-10 seconds then reconnect. Place the handset back on the base and reinsert the AC Adapter.

•Make sure the handset battery is fully charged.

N G L I S H