Cortelco 2757 manual Call Forwarding, Advanced Settings

Page 38

2.Numbers can now be entered in the spaces for Speed Dial 1 – 5. Only numbers may be placed in these spaces. To save the settings, press ‘Submit’ on the bottom of the webpage.

3.2 Call Forwarding

The 2757 supports three methods of call forwarding. These numbers may also be entered on this web page. Again, only numbers are allowed in these entries.

3.2.1Busy

An incoming call will be transferred to this number if the 2757 is busy or if DND is activated.

3.2.2No Answer

An incoming call will be transferred to this number if the call is not answered.

3.2.3Unconditional

All incoming calls will be transferred to this number.

3.2.4DND

The number to which incoming calls will be transferred when DND is activated.

3.3Advanced Settings

CAUTION: These settings should only be changed by someone with a thorough understanding of VoIP.

3.3.1Inter Digit Time

This is the time interval between dialed digits.

38

Image 38
Contents VoIP Phone Users Guide Table of Contents 10.1 Recover from Unsuccessful Firmware Update Package Contents FeaturesBasic Setup Page Network Setup Static IP AddressPage Described above to enter the subnet mask PPPoE Page Page Page Dhcp Page Network Setup Web Configuration Display IP AddressWeb Interface Network Configuration Page Page SIP Server Information Setup Page Page Page SIP Server Information Setup Web Configuration Page Accepting and Making Phone Calls Accepting phone callsTransfer Trfr In-Call OptionsAttended Transfer 2.2 3-way Blind TransferPage Making phone calls LineHold Caller ID on Call Waiting Calling History Placed Calls Missed Calls Received Calls Unanswered CallsReceiving Calls Call Rejection DNDPlacing Calls Speakerphone and HeadsetSpeed Dial HeadsetAdvanced Settings Call ForwardingForward Timer Handset Volume/Handsfree Volume/Headset VolumeRing Volume End of Dial KeyNTP Server Address Entry of Call Forward numbers from phoneSet Time Zone Phone Book Management Web InterfacePhone Interface Page Browse System Information LCD screenClick ‘Status’ Page Change Display Language Change Ringer Type Adjust the Contrast of LCD Screen Page Reboot the IP Phone Click on ‘Management’ Factory Reset Click ‘Management’ Change Password for the Web Interface Troubleshooting Firmware Update Upgrade ProcedureRecover from Unsuccessful Firmware Update