Basic Functions
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the 
key.
Making a Call
1.Pick up the handset and press the 
key.
Result: The In use indicator flashes and the 
icon appears on the LCD.
2.Dial a telephone number.
3.To end the call, either press the 
key or replace the handset on the base.
Note:
To make a call to the last number you dialed, use the Redial feature. For details, see page 17.
You can enter the desired phone number in standby mode, which allows you to make corrections before dialing. Follow these steps:
1.Enter a telephone number (up to 32 digits).
Check it. You can also use the 
key to insert a pause.
Note:
If you make a mistake while entering a number, press the Erase soft key to clear the last digit.
2.When the number appears correctly, press
the 
key.
16