Receiving a Call
When a call is received, the In use indicator on the base will blink. The New Call
information will appear, too.
If the caller can be identified, the caller's phone number is displayed. If the caller cannot be identified, only the New Call information displays. If you have a voice
message, the 
icon and "MSG WTG ON" will be shown on the LCD.
1.To answer the call, press the 
key. If you have activated the Auto Answer function, when the handset is on the base, simply lift it up to answer.
2.To end the call, either press the 
key or replace the handset on the base.
Result: After you hang up, the LCD displays the call duration.
Notes:
You can select the ringer volume by using
the 
or 
key when the phone rings with an incoming call.
If you want to deactivate the 
icon, press
the 
key in standby mode, then press and hold the 4ghi key. After that, press the
key to return to standby mode. (The handset must be registered to the base.)
If the polyphonic ring tone is set, the ring tone may continue for 4 seconds after the caller's
17