TELEPHONE SETTINGS
KEYPAD
There are two user options for the keypad,
The keypad can be locked to prevent unintended operation
•Press scroll keys 5/6(6) to select “KEYPAD” and press YES (3) to confirm.
•Press scroll keys 5/6(6) to select “KEY LOCK” and press YES (3) to lock the key pad. Once locked, all key presses cause the message ‘UNLOCK?’ to be shown on the LCD. The user must then press the YES (3) key to unlock.
The Key tone can be used to indicate that a key has been pressed. This beep can be enabled or disabled.
To disable the key tone:
•Press scroll keys 5/6(6) to select “KEYPAD” and press YES (3) to confirm.
•“KEY TONE” would be displayed and press YES (3) to confirm.
•Press scroll keys 5/6(6) to select “TONE OFF” and press YES (3) to disable the key tone.
To enable the key tone:
•Press scroll keys 5/6(6) to select “KEYPAD” and press YES (3) to confirm.
•“KEY TONE” would be displayed and press YES (3) to confirm.
•Press scroll keys 5/6(6) to select “TONE ON” and press YES (3) to enable the key tone.
SETTING CLOCK
The clock is set by the user and can be viewed as 24 hour or 12 hour. The default format is factory set, but the user can then change to the alternative format if preferred.
•Press scroll keys 5/6(6) to select “CLOCK” and press YES (3) to confirm.
•Press scroll keys 5/6(6) to select SET TIME and press YES (3) to confirm.
•“TIME” is displayed, key in the correct time by 24 hour format. (e.g. 10:00pm, press 2200 ) then YES (3) to confirm.
•The set time is displayed on LCD.
E - 19
9038_2_ib_e.p65 | 19 | 10/31/03, 12:20 PM |