Hard of hearing Options

Volume Controls

You can increase the volume of the ringing by pressing the VOL. button while your phone is ringing or when the phone is idle by pressing SPK and dialling 829.

Ensure your phone is set to RING mode. See Answering an Intercom Call in this guide.

You can increase the volume of the handset earpiece by pressing the VOL. button when the handset is off hook. There are three volume settings (Low - Med - High).

Visual indications

The indicator lamp at the top corner of the IPC 100 Display and System phone will flash RED to indicate various call types:

•Intercom Call. Your phone is ringing, the CALL key is flashing red and the display will show FROM and the callers name/number.

•Outside Call. Your phone is ringing, the display may show the callers name/number or RINGING.

•Message Waiting. See Message Waiting in this guide.

•You may have a new Voice Mail Message. See the separate Voice Mail and Voice Response System User Guide.

The LCD display of the IPC 100 Display phone will show the callers name and number for internal calls and also where available for outside calls.

Hearing Aid Compatibility

The earpiece within the handset of the IPC 100 Display and System handset has a built in inductive coupler and is compatible with hearing aids that have the ‘T’ setting.

Additional Options

The ringing tone/pitch can not be changed on the IPC 100 Display or System phones.

Consult the system supplier/installer for additional volume settings or equipment that may help.

EU REGULATORY INFORMATION

CE Notice (European Union)

Hereby, “Philips Business Communications”, declares that this system terminal for the SOPHO IPC 100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For a copy of the declaration of conformity please visit http://www.sopho.philips.com/doc or contact us at the address mentioned in this manual.

Nothing contained in this manual shall be deemed to be, and this manual does not constitute, a warranty of, or representation

with respect to, any of the equipment covered. This manual is subject to change without notice and Philips Business Communications has no obligation to provide any updates or corrections to this manual. Further, Philips Business Communications also reserves the right, without prior notice, to make changes in equipment design or components as it deems appropriate. No representation is made that this manual is complete or accurate in all respects and Philips Business Communications shall not be liable for any errors or omissions. In no event shall Philips Business Communications be liable for any incidental or consequential damages in connection with the use of this manual. This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied or reproduced without prior written consent of Philips Business Communications.

	Copyright © 2005 by Philips Business Communications
	All Rights Reserved.
Philips Business Communications	Issue 1.2 July 2006
P.O. Box 32
1200 JD Hilversum
The Netherlands