Memorex mph 6955 manual Troubleshooting, Specifications

Problem

Suggestion

Charge light won’t come on when

• Make sure the AC adapter is plugged into the base and wall outlet.

handset is placed in base.

• Make sure the handset is properly seated in the base.

• Make sure the rechargeable battery pack is properly connected in the handset.

• Make sure that the charging contacts on the handset and on the base are clean.

The audio sounds weak and/or scratchy.

• Make sure that the base antenna is in the vertical position.

• Move the handset and/or base to a different location away from metal objects or

appliances and try again.

Can’t make or receive calls.

• Check both ends of the telephone line cord.

• Make sure the AC adapter is plugged into the base and a wall outlet.

• Disconnect the AC adapter for a few minutes, then reconnect it.

• Place the handset back on the base for a few seconds.

The STATUS LED will blink indicating that the phone has been reset.

Handset doesn’t ring or receive a page.

• The Nickel-Cadmium battery pack may be weak.

Charge the battery for 15-20 hours.

• The handset may be too far away from the base.

• Place the base away from appliances or metal objects.

• Place the handset back on the charging cradle for a few seconds.

The STATUS LED will blink indicating that the phone has been reset.

Specifications

General

Frequency Control

Phase Locked Loop

Modulation

FM

Operating Temperature

-10° to 50° C, 14° to 122° F

Base

Transmit Frequency

925.997 ~ 927.947 MHz (40 Channels)

Power Requirements

9V 210mA (from AC adapter)

Size

4.53 in. W X 2.17 in. D X 8.82 in. H

Weight

Approximately 12 oz.

Handset

Transmit Frequency

902.052 ~ 904.002 MHz (40 Channels)

Size

2.28 in. W X 1.73 in. D X 7.09 in. H

Weight

Approximately 8.9 oz.

Battery

Capacity

600 mAH, 3.6V

Talk Mode

7 hours

Standby Mode

14 days