Entering a Pause in Memory Dialing

Color profile: Disabled Composite Default screen

If you would like to use a phone number stored in memory to access voice mail, for example, you can store a pause in the phone number sequence.

To use this function, follow steps 1 and 2 in “Storing a Number in Memory,” then press the PAUSE button on the handset to place a pause in the phone number sequence.

Remember, the phone number you wish to store cannot have more than 16 digits,

NOTE including the pause. (The PAUSE button counts as one digit.)

Follow the remaining steps in the “Storing a Number in Memory” section to complete the operation.

Storing Mixed Tone/Pulse Numbers

If your phone is set up for pulse dialing, you can store a mixed mode number (up to 16 digits) to easily access long distance services.

1. Remove the handset from the base and press MEM. The TALK LED flashes and you hear a beep.

2. Enter the number to be dialed in pulse mode.

3.Press the ✱/TONE button on the handset. The ✱/TONE button counts as one digit and enters a pause.

4.Enter the number(s) to be dialed in tone mode.

5.Press MEM and a number (0-9) on the keypad for the memory location you wish to use. You hear a long beep and the TALK LED goes out.

Dialing a Stored Number

To dial a phone number stored in memory, press TALK, then press MEM and the memory location (0-9). Your phone will dial the stored number.

	If you select a memory location that does
NOTE	not have a stored number, the handset will
NOTE	beep rapidly and the phone will not dial.

One-Touch Dialing

Your phone is equipped with three “One-Touch Priority” keys for instant dialing (M1, M2, and M3). You cannot store phone numbers directly into M1, M2, and M3. They are only used to dial phone numbers stored into memory locations 1, 2, and 3 on the keypad.

1. To instantly dial phone
numbers stored in
memory locations 1, 2,	pqrs	tuv	wxyz
	pqrs	tuv	wxyz
or 3, simply press M1,		oper
M2, or M3. (There is no		oper
M2, or M3. (There is no
need to press talk, the
phone will
automatically dial.)

2. If no phone number was stored in memory locations 1, 2, or 3 on the keypad, pressing M1, M2, or M3 will

do nothing.

Chain Dialing

After dialing a number you may be requested to enter a special access code, for example, when performing a banking transaction.

1.Store the access code into one of the memory locations (0-9).

2.Dial the main number.

3.Press MEM and the memory location of the access code at the appropriate time.

H:...MPH 6955 Map OM.vp Mon Jun 28 16:00:20 1999