![](/images/new-backgrounds/1200525/20052559x1.webp)
2.Press m. All the bases that your handset has been registered to will be displayed, e.g. BASE 1 2 3 4. The currently selected base number flashes.
3.Enter the base number that you want to use. Alternatively, press uor dto scroll to AUTO.
4.Press mto confirm. You will hear a confirmation beep and the display will return to the previous menu.
NOTE
If you select AUTO, your handset will automatically search for and connect to the base with the strongest signal.
9.4De-register a handset
Use one handset to
1.Press m, scroll dto SETUP and press m.
2.Scroll dto DEL HANDSET and press m.
3.Enter the 4 digit PIN code (default = 0000) and press m.
4.Enter the handset number that you want to
10. Help
No dial tone
•Use only the telephone line cord supplied.
•Check that the telephone line cord is connected properly.
•Check that the mains power is connected properly and switched on.
No display
• Check that the batteries are inserted correctly and fully charged. Use only approved rechargeable batteries supplied.
• Check that the handset is switched on. Press and hold
n.
•Reset the base by removing the batteries and disconnecting the mains power. Wait for around 15 seconds before connecting it again. Allow up to one minute for the handset and base to synchronize.
icon flashes
•Handset is out of range. Move closer to the base.
•Make sure that the handset is registered to the base, see page 28.
•Check that the mains power is connected properly and switched on.
Keypad does not seem to work
• Check that the keypad lock is not on, see page 17.
30 | Help |
|
|