Motorola S1204, S1201, S1202, S1203 Date and time, Set the date manually, Set the time manually

Page 8

Please do not use alkaline or non rechargeable batteries. It may cause permanent damage to the product and void the warranty.

BATTERY LOW WARNING

If icon flashes on the display and you hear a warning beep every minute during a call, you will need to recharge the handset before you can use it again.

When charging, icon will scroll on the display. Once fully charged scrolling will stop.

BATTERY PERFORMANCE

In ideal conditions, fully charged batteries should give up to 10 hours talk time or up to 200 hours standby time on a single charge1.

Note that new batteries do not reach their full capacity until they have been put to normal use for several days.

To keep your batteries in the best condition, leave the handset off the base for a few hours at a time.

Running the batteries right down at least once a week will help them last as long as possible.

The charge capacity of rechargeable batteries will reduce with time as they wear out, giving the handset less talk/ standby time. Eventually they will need to be replaced.

1All talk and standby times are approximate and depend on features selected and usage pattern.

8

After charging your handset for the first time, subsequent charging time is about 6–8 hours a day. Batteries and handset may become warm during charging. This is normal.

Date and time

If you have subscribed to a Caller ID Service, the date and time is set automatically for all handsets when you receive your first call.

If you do not have Caller ID service, you can set the date and time manually.

Set the date manually

1.Press m, scroll d to DATE-TIMEand press m. The display shows DATE SET.

2.Press m to select.

3.Enter the date (e.g. 12--08 for 12th of August) and press mto confirm.

Set the time manually

1.Press m, scroll d to DATE-TIMEand press m.

2.Scroll dto CLOCK SET and press m.

3.Enter the time in 24 hour format (e.g. 18--30 for 6:30pm) and press mto confirm.

Your S12 is now ready for use.

Getting started

Image 8 Contents
Motorola S12 Welcome Got everything? Getting to know your phone Using the phone Handset settingsBase settings PhonebookClock & alarm Using additional handsetsCaller ID and the Calls list Help General informationSetting up Connecting the baseGetting started LocationInstalling and charging the handset Connecting the handset and charger for multi-pack onlySet the time manually Date and timeSet the date manually Getting to know your phone Overview of your handsetHandset LCD Display Display iconsOverview of the base Navigating the menus Phonebook Setup Handset Date Time Register Menu mapUsing the phone Hands-free speakerphone Receive an internal callTransfer a call 4 3-way conference callRedial Delete the entire Redial list Lock/unlock the keypadPaging/Find handset View or dial an entry PhonebookStore a name and number Edit a name and number Delete an entryHandset settings Handset ringer volumeHandset ringer melody Auto answerBattery low warning beep LanguageKey beep Out of range warning beepBase settings Keypad lock using the menuBase ringer volume Base ringer melodyDial mode Recall modeRestore default settings Change base PIN codeEmergency default Eco modeClock & alarm Default settingsSet the date Set the timeSet alarm Switch off alarm ringCaller ID and the Calls list Caller IDDial a number in the Calls list Calls listView the Calls list Using additional handsets Registering an additional handsetDelete the entire Calls list On the baseOn the handset Register a different make of handset to your S12 baseSelect a base Help De-register a handsetIcon is not scrolling during charge No Caller IDHave forgotten my PIN Cannot register a handset to the baseUnplug this cordless phone immediately from an outlet if Important safety instructionsGeneral information Installation Guidelines Battery Safety InstructionsCleaning Consumer Products and Accessories WarrantyEnvironmental Product disposal instructionsProduct Consumer Accessories Ninety 90 days from the dateAccessories original Exclusions Email support@alcom.com.sgRecall Connecting to a switchboardTechnical Information Declaration of Conformity DoC EMCVersion 8 SG