2.Slide the battery compartment cover back on.
3.Put the handset on the base to charge for at least 24
hours. Once charged, the will indicate that the handset is fully charged.
IMPORTANT
Use only the rechargeable battery pack provided with the product.
1.3Assembling the rubber band of cordless handset (Not applicable for
L60xM models)
If you have purchased additional rubber band(s) of the cordless handset separately, refer to the following steps for replacement. To remove the originally installed rubber band, dig out the rubber band from handset bottom gap and then take it off from handset around.
1.To assemble the rubber band, align the protuberant pins of the rubber band with the holes around of the handset sides and click the rubber band into place. Respect the direction, side with gap should be attached to the handset bottom, as shown.
8
2.Press and smooth out the rubber band to enwrap the handset firmly.
1.4Setting the display language
1.Press MENU and then VOL+ or REDIAL/VOL- to select
SETUP HS.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
LANGUAGE.
3.Press MENU and then VOL+ or REDIAL/VOL- to select the desired language.
4.Press MENU to save.