3.19Resetting all settings
1.Press MENU and then VOL+ or REDIAL/VOL- to select
RESET SETTINGS.
2.Press MENU and then VOL+ or REDIAL/VOL- to select
ALL SETTINGS.
3.Press MENU to select YES. All personalized settings will be reset to default.
NOTE
All of your phonebook entries, calls list, and redial list, will remained unchanged.
3.20Paging/Finding a handset
Press FIND on the base. All handsets registered to the base will ring.
To stop the paging, press FIND again, or press any key on the handset, or place the handset on the base.
4. Help
The icon is not scrolling when the handset is placed on the base
•Handset not properly seated on the base cradle
•Dirty contact - clean the charge contacts by wiping with an alcohol moistened cloth.
•Battery is full - charging is not necessary at this time.
No dial tone
•If there is no base power, check the connections. Reset the phone by unplugging then plugging it back into an electrical outlet.
•If the handset batteries are empty, recharge the battery pack for at least 24 hours.
•Move the handset closer to the base.
•Be sure to use only the provided telephone cords.
Poor audio quality
•If the base is too close to electrical appliances, reinforced concrete walls, or metal door frames, move the base from these areas.
Help | 21 |
|
|