3 Turn the jog dial.
The frequency indication changes and scanning stops when the system tunes in a station. “TUNED” and “STEREO” (for a stereo programme) appear.
TUNED
STEREO
VOLUME
AUTO
MHz
4 Press TUNER MEMORY.
A preset number appears in the display.
Preset number
TUNED
STEREO
VOLUME
AUTO
5 Turn the jog dial to select the preset number you want.
6 Press ENTER/NEXT.
The station is stored.
7 Repeat steps 1 to 6 to store other stations.
To tune in a station with a weak signal
Press TUNING MODE repeatedly to select “MANUAL” in step 2, then turn the jog dial to tune in the station.
To change the preset number
Start over from step 1.
Tip
The preset stations are retained for half a day even if you unplug the power cord or if a power failure occurs.
Connectingoptional AVcomponents
To enhance your system, you can connect optional components. Refer to the instructions of each component.
Connecting audio components
Select one of the following two connections, depending on the equipment to be connected and method of connecting.
Connecting an MD deck for digital recording
You can record from CD into the MD deck digitally by connecting an optical cable.
To the DIGITAL IN jack of the MD deck
continued
7
