Sony MHC-RX80 Setting the time, 1 2,4 3,5, Presetting radiostations, 6 2 1, Press CLOCK TIMER SET

Step 2: Setting the time

You must set the time before using the timer functions.

1 2,4 3,5

0 ) ¹

¤ á¸

1 Press CLOCK TIMER SET.

The hour indication flashes.

2 Turn the jog dial to set the hour.

The clock is on a 12-hour system.

3 Press ENTER/NEXT.

The minute indication flashes.

4 Turn the jog dial to set the minute.

5 Press ENTER/NEXT.

The clock starts working.

Tips

•If you’ve made a mistake, start over from step 1.

•Setting the time deactivates the demo mode . If you want to display the demo mode, press DISPLAY/DEMO when the power is off.

Note

When setting the time, set the equalizer display to anything other than Spectrum analyzer pattern 3. (See “To change the equalizer display” on page 30.)

Step3: Presetting radiostations

The 3 band model lets you preset up to 40 stations, 20 for FM, 10 for MW and 10 for LW. The 4band model lets you preset up to 45 stations, 20 for FM, 10 for MW and 5 for UKV.

POWER 3,5	6 2 1 4
0 )	¹
	¤ á¸

1 Press TUNER/BAND repeatedly until the band you want appears in the display.

the bands you can recieve vary depending on the model you purchased. Be sure to check which bands you can recieve.

Every time you press this button, the band changes as follows:

3 band models: FM nMW nLW

n 4 band model:

FM nMW nLW nUKV* n

*“STEREO PLUS” is displayed when you select UKV.

2 Press TUNING MODE repeatedly to select “AUTO”.

6