Sony MHC-RX80 manual Specifications, Amplifier section, CD player section, Tape player section

Specifications

Amplifier section

DIN power output	40 + 40 watts
	(6 ohms, at 1kHz, DIN)
Continuous RMS power output
	55 + 55 watts
	(6 ohms at 1 kHz,
	10% THD)
Music power output	95 + 95 watts
	(6 ohms at 1 kHz, 10%
	THD)
Inputs	VIDEO/MD IN (phono
	jacks): voltage 250 mV,
	impedance 47 kilohms
	MIX MIC (phone jack):
	sensitivity 1 mV,
	impedance 10 kilohms
Outputs	VIDEO/MD OUT (phono
	jacks): voltage 250 mV
	impedance 1 kilohms
	PHONES (stereo phone
	jack): accepts headphones
	of 8 ohms or more.
	SPEAKER: accepts
	impedance of 8 to 16
	ohms.
	SURROUND SPEAKER
	(MHC-RX80 only):
	accepts impedance of 16
	ohms.

CD player section

System	Compact disc and digital
	audio system
Laser	Semiconductor laser
	(λ=780nm)
	Emission duration:
	continuous
Laser output	Max. 44.6 μW*
	*This output is the value
	measured at a distance of
	200 mm from the
	objective lens surface on
	the Optical Pick-up Block
	with 7 mm aperture.
Frequency response	2 Hz – 20 kHz (±0.5 dB)
Wavelength	780 – 790 nm
Signal-to-noise ratio	More than 90 dB
Dynamic range	More than 90 dB
CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength	600 nm
Output Level	–18 dBm

Tape player section

Recording system	4-track 2-channel stereo
Frequency response	60 – 13,000 Hz (±3 dB),
(DOLBY NR OFF)	using Sony TYPE I
	cassette
	60 – 14,000 Hz (±3 dB),
	using Sony TYPE II
	cassette
Wow and flutter	±0.15% W.Peak (IEC)
	0.1% W.RMS (NAB)
	±0.2% W.Peak (DIN)

Tuner section

FM stereo, FM/AM superheterodyne tuner

FM tuner section
Tuning range
3 band type model:	87.5 – 108.0 MHz
	(50 kHz setp)
4 band type model:	65.0 – 74.0 MHz (10 kHz
	step)
	87.5 – 108.0 MHz
	(50 kHz step)
Aerial	FM Lead aerial
Aerial terminals	75 ohm unbalanced
Intermediate frequency	10.7 MHz

UKV tuner section (4 band type model only)

Tuning range	65.0-74.0 MHz
	(10 kHz step)
	Polar Stereo
AM tuner section
Tuning range	MW: 531 – 1,602 kHz
	(with interval set at
	9 kHz)
	LW: 153 – 279 kHz
	(with interval set at
	3 kHz)
Aerial	AM loop aerial
	External aerial terminal
Intermediate frequency	450 kHz

42