Listening to the radio (continued)
1 Press TUNER/BAND repeatedly until the band you want appears in the display.
the bands you can recieve vary depending on the model you purchased. Be sure to check which bands you can recieve.
Every time you press this button, the band changes as follows:
3 band models:
FM nMW nLW n 4 band model:
FM nMW nLW nUKV* n
*“STEREO PLUS” is displayed when you select UKV.
2 Press TUNING MODE repeatedly so that “PRESET” appears in the display.
MANUAL nAUTO nPRESET n
3 Turn the jog dial (or press = or
+on the remote) to tune in the
desired preset station. | Turn clockwise | |
Turn counter- |
| |
clockwise |
| (or press + |
(or press = – | + on the remote) | |
on the remote) |
| for higher |
for lower preset |
| preset numbers. |
numbers. |
|
|
Preset number | Frequency | |
|
| TUNED |
|
| STEREO |
|
| VOLUME |
PRESET |
| MHz |
To listen to non-preset radio stations
Press TUNING MODE repeatedly so that “MANUAL” appears in step 2, then tune in the station by turning the jog dial.
Tips
•Pressing TUNER/BAND when the power is off automatically turns the power on and tunes to the last received station (One Touch Play).
•You can switch from another source to the radio just by pressing TUNER/BAND (Automatic Source Selection).
•When an FM programme is noisy, press STEREO/MONO so that “MONO” appears in the display. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect.
•To improve broadcast reception, reorient the supplied aerials.
To | Do this |
Turn off the radio | Press POWER. |
|
|
Adjust the volume | Turn VOLUME (or press |
| VOL +/– on the remote). |
|
|
14