Icom IC-208H instruction manual Partial reset

■ Partial reset
	AT POWER ON

If you want to initialize the operating conditions (VFO fre- quency, VFO settings, set mode contents) without clearing the memory contents.

➥While pushing [V/MHz•SCAN] and [SET•LOCK], push [PWR] for 1 sec. to partially reset.

[PWR]

[S.MW•MW] [V/MHz•SCAN]

OTHER FUNCTIONS 11

■ All reset
	AT POWER ON

The function display may occasionally display erroneous in- formation (e.g. when first applying power). This may be caused externally by static electricity or by other factors.

If this problem occurs, turn power OFF. After waiting a few seconds, turn power ON again. If the problem persists, per- form the following procedure.

• Partial resetting is also available. See left for details.

IMPORTANT!:

Resetting the transceiver CLEARS all memory information and initializes all values in the transceiver.

➥While pushing [S.MW•MW] and [SET•LOCK], push [PWR] for 1 sec. to reset the CPU.

11

[SET•LOCK][PWR]

[S.MW•MW]

68