Icom IC-208H DTo indicate the channel name, Push SET BD-OFF or ENT CT-OFF until ANM appear

5 MEMORY OPERATION

DTo indicate the channel name [

The channel name indication can be set for independent memory channels.

qPush [M/CALL•PRIO] to select the memory mode.

wRotate [DIAL] to select the desired memory channel to be indicated the channel name.

ePush [SET•LOCK] to enter set mode.

rPush [SET•LOCK] or [S.MW•MW] several times to select

“ANM” item.

tRotate [DIAL] to turn the memory name indication ON.

yPush [V/MHz•SCAN] to exit set mode.

NOTE: When no memory name is programmed, the stored frequency is displayed.

zPush [MR/CALL] to select the memory mode.

SET x Push [Y] or [Z] to select the desired memory

Bchannel to be indicated the channel name. c Push [SET B(D-OFF)] to enter set mode.

v Push [SET B(D-OFF)] or [ENT C(T-OFF)] until “ANM” appear.

Push

bPush [Y] or [Z] to set the memory name indi- cation ON and OFF.

nPush [CLR A(MW)] to exit set mode.

33