Icom IC-208H Microphone keys, UP/DN keys on a microphones, 1/F-2 keys on HM-133, Default setting

11 OTHER FUNCTIONS

■Microphone keys

The supplied HM-133’s (optional for some versions) [F-1] and [F-2] keys memorize the transceiver conditions.

The [UP]/[DN] keys of the standard or an optional microphone (other than the HM-133) can be assigned functions like the function keys on the transceiver’s front panel.

D[UP]/[DN] keys on a microphones

(other than HM-133) AT POWER ON

The following functions are assigned to [UP]/[DN] keys on the other microphones (HM-118N/TAN, etc.) when first applying power.

•Default setting

[UP] : channel up; push and hold to start scan, push again to stop scan.

[DN] : channel down; push and hold to start scan, push again to stop scan.

➥Assigning a function q Turn the power OFF.

w While pushing the desired switch on the transceiver and one of either [UP]/[DN] keys on the microphone, turn the power ON.

•The function is programmed into the key.

➥Clearing an assignment

qTurn the power OFF.

wWhile pushing the desired [UP] or [DN] key on the micro- phone, turn the power ON.

D[F-1]/[F-2] keys on HM-133

The following conditions can be memorized into [F-1] and [F- 2] keys, independently.

•Operating frequency

•Repeater setting (offset direction and frequency, tone ON/OFF and frequency)

•Tone/DTCS squelch (ON/OFF, frequency/code and polarity)

•Transmit output power selection

•Tuning step

•Operating mode selection (FM/AM)

➥Programming the band condition

[F-1]/[F-2] Push [F-1]/[F-2] for 1 sec.

•3 beeps sound.

➥Recalling the band condition Push [F-1]/[F-2] momentarily.

➥Initializing the band condition Push [FUNC] then push [F-1]/[F-2].

The following conditions are initialized.

•Operating band: 145 MHz band

•Repeater setting (tone frequency: 88.5 Hz, offset

frequency: 600 kHz)

•Tone/DTCS squelch (ON/OFF: OFF, tone fre-

quency:88.5 Hz, DTCS code: 023 and polarity: NN)

•Transmit output power selection: HIGH

•Tuning step: 5 kHz

•Call channel: 1 CH, memory channel: 1CH

•Operating mode selection: FM

67