Icom IC-208H Call Channel Operation, Call channel selection, Call channel transferring

CALL CHANNEL OPERATION 6

■Call channel selection

Call channel is pre-programmed memory channel that can be accessed by simply pushing call channel button.

■Call channel transferring

qPush [M/CALL•PRIO] several times then push [BAND] to select the desired call channel.

• “C1” or “C2” appears.

➥Push [M/CALL•PRIO] several times to select the call chan- nel mode then push [BAND] to select the desired call channel.

•“C1” or “C2” appears instead of memory channel number indi- cation.

•Push [M/CALL•PRIO] several times to select memory mode, or push [V/MHz•SCAN] to select VFO mode.

[M/CALL•PRIO] “C1” or “C2” appears

➥Push [MR/CALL] for 1 sec. to select the call

MR/CALL	channel mode then push [Y]/[Z] to select the
	desired call channel in the main band.

•Push [MR/CALL] to select memory mode, or push [VFO/LOCK] to select VFO mode.

wPush [S.MW•MW] then rotate [DIAL] to select the memory channel to transfer the contents.

•“!” indicator and memory channel number blink.

•To transfer to the VFO, select “-- -- --” with [DIAL] then push. e Push [M/CALL•MW] for 1 sec. to transfer the contents.

zPush [MR/CALL] for 1 sec. then push [BAND]

MR/CALL to select the desired call channel.

xPush [FUNC], [CLR A(MW)] momentarily, then push [Y]/[Z] to select the memory channel to

MW transfer the contents.

•To transfer to the VFO, push [Y]/[Z] to select “-- -- --”.

[Y]/[Z] c Push [FUNC], then [CLR A(MW)] for 1 sec. to transfer the contents.

BAND

5

6

✔INFORMATION

When the VFO mode is selected from the call channel, a small “c” appears instead of memory channel number.

38