Icom IC-208H Programming scan edges via microphone, Set the desired frequency in VFO mode

7 SCAN OPERATION

DProgramming scan edges via microphone

zSet the desired frequency in VFO mode.

MW ➥ Push [VFO/LOCK] to select VFO mode.

➥Set the frequency via the keypad or [Y]/[Z]. x Push [FUNC] then [CLR A(MW)] momentarily. c Push [Y] or [Z] to select scan edge channels,

1A, 2A, 3A, 4A or 5A.

v Push [FUNC], then push [CLR A(MW)] for 1 sec. to program.

• 3 beeps sound and VFO is automatically selected.

• Memory channel number advances to the next scan edge channel, 1B, 2B, 3B, 4B or 5B when continuing to push [CLR A(MW)] after programming.

bTo program a frequency for the other scan edge channels, repeat steps z to v.

[EXAMPLE]: Programming 145.800 MHz into scan edge 1B.

Push Push Push then momentarily

Push Push then for 1 sec. and continue to push ➠

“Beep“

“Beep

“Beep

“

“Beep

43